REDMAX BARS

 Oregon replacement guide bar for red max chainsaw

1 - 44 of 44 items

OREGON 080SDEA041 8" Chainsaw guide BAR .050 33 DL

OREGON 080SDEA041 8" Chainsaw guide BAR .050 33 DL

THIS DOUBLE GUARD BAR IS 8 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 33 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING Chicago Electric pole SAWS WITH A 3/8 LP PITCH SPROCKET. Chicago Electric MODELS 68862...

  • Price: $22.95

Oregon 160MPBK095 16" Micro-lite Chainsaw bar .325 66 DL 050

Oregon 160MPBK095 16" Micro-lite Chainsaw bar .325  66 DL 050

THIS Oregon 160MPBK095 Micro-lite BAR IS 16 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 66 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click...

  • Price: $33.99

Oregon 180MPBK095 18" Micro-lite Chainsaw bar .325 72 DL 050

Oregon 180MPBK095 18" Micro-lite Chainsaw bar .325  72 DL 050

This Oregon 180MPBK095 Micro-lite BAR 18 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Makita, Partner, Pioneer, Red Max or Stanley saws...

  • Price: $33.99

OREGON 084MLEA041 8" BAR fits Oregon PS250 40V pole saw +

OREGON 084MLEA041 8" BAR fits Oregon PS250 40V pole saw +

THIS DOUBLE GUARD BAR IS 8 INCH. (1.1MM) 3/8 PITCH LOW PROFILE .043 GAUGE AND USES 33 or 34 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING Oregon PS250 40V pole SAWS WITH A 3/8 LP PITCH SPROCKET. Chain choices for this...

  • Price: $22.95

OREGON 100SDEA041 10" Replacement Chainsaw guide BAR 3/8 LP

OREGON 100SDEA041 10" Replacement Chainsaw guide BAR 3/8 LP

THIS DOUBLE GUARD INTENZ BAR IS 10 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 40 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. Chain choices for this bar 91P X040G = Low-kick 90VXL040G = Professional chain Click Bar selector below if...

  • Price: $20.39

OREGON 120DGET041 12" chainsaw guide Bar 3/8 Low profile

OREGON 120DGET041 12" chainsaw guide Bar 3/8 Low profile

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR IS 12 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 45 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. some bars...

  • Price: $20.39

OREGON 120SDEA041 12" chainsaw guide Bar 3/8 Low profile

OREGON 120SDEA041 12" chainsaw guide Bar 3/8 Low profile

120SDEA041 THIS DOUBLE GUARD BAR IS 12 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 45 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. some bars have red or black paint on gray Fits...

  • Price: $20.39

OREGON Power Sharp Starter Kit 551664 fits 12" Echo Poulan +

OREGON Power Sharp Starter Kit 551664 fits 12"  Echo Poulan +

THIS 551664 POWERSHARP KIT BAR/CHAIN COMBO IS 12 INCH CUT. Take your chain saw's chain from dull to sharp in as little as 3 seconds with the portable Oregon® PowerSharp® system. This lightweight bar-mount sharpener is small enough for...

  • Price: $44.99

OREGON 124MLEA041 12" chainsaw guide Bar 3/8LP 45 DL .043 gauge

OREGON 124MLEA041 12" chainsaw guide Bar 3/8LP 45 DL .043 gauge

124MLEA041 THIS DOUBLE GUARD BAR IS 12 INCH. (1.1MM) 3/8 PITCH LOW PROFILE .043 GAUGE AND USES 45 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 90 STAMPED ON DRIVE LINK THAT FIT THIS BAR. some bars have red or black paint on gray Fits...

  • Price: $20.99

Oregon 138SLBK095 13" Pro-lite Chainsaw Guide bar .325 56 DL

Oregon 138SLBK095 13" Pro-lite Chainsaw Guide bar .325  56 DL

THIS PROLITE BAR IS 13 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 56 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to make...

  • Price: $31.99

OREGON 140SDET041 14" chainsaw guide Bar 3/8 LP 52DL .050

OREGON 140SDET041 14" chainsaw guide Bar 3/8 LP 52DL .050

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR IS 14 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 52 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. some bars...

  • Price: $23.99

OREGON 140SXEA041 14" chainsaw guide bar 3/8 pitch .050 52 DL

OREGON 140SXEA041 14" chainsaw guide bar 3/8 pitch .050 52 DL

THIS Oregon pro-lite BAR IS 14 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 52 DRIVE LINK CHAIN.THIS BAR has A heavy Duty SPROCKET NOSE with 3 rivets.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. THIS BAR fits SAWS WITH A 3/8...

  • Price: $26.99

OREGON Power Sharp Starter Kit 541652 fits 14" Echo Poulan +

OREGON Power Sharp Starter Kit 541652 fits 14"  Echo Poulan +

THIS 541652 POWERSHARP KIT BAR/CHAIN COMBO IS 14 INCH CUT. Take your chain saw's chain from dull to sharp in as little as 3 seconds with the portable Oregon® PowerSharp® system. This lightweight bar-mount sharpener is small enough for...

  • Price: $34.99

Oregon 158SLBK095 15" Pro-lite Chainsaw Guide bar .325 64 DL

Oregon 158SLBK095 15" Pro-lite Chainsaw Guide bar .325  64 DL

THIS PROLITE BAR IS 15 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 64 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to make...

  • Price: $33.99

OREGON 160RNDD009 16" Power Match chainsaw bar 3/8 .050 60 DL

OREGON 160RNDD009 16" Power Match chainsaw bar 3/8 .050 60 DL

THIS PROFESSIONAL Oregon BAR IS 16 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 60 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This fits...

  • Price: $41.29

OREGON 160RNDD176 16" chainsaw Bar 3/8 PITCH .050 60 DL

OREGON 160RNDD176 16" chainsaw Bar 3/8 PITCH .050 60 DL

THIS PROFESSIONAL BAR IS 16 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 60 DRIVE LINK CHAIN. FITS ECHO SAWS WITH A 3/8 PITCH SPROCKET- CS-600P ,CS650EVL ,CS660EVL CS-670 ,CS-680 ,CS-701 ,CS-702 ,CS-750 EVL ,CS-6700 ,CS8000 AND MORE

  • Price: $41.29

OREGON 160SDET041 16" chainsaw guide bar 3/8 pitch .050 56 DL

OREGON 160SDET041 16" chainsaw guide bar 3/8 pitch .050 56 DL

THIS DOUBLE GUARD INTENZ -(CHAIN TENSIONING MECHANISM BUILT IN) BAR IS 16 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 56 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. THIS BAR...

  • Price: $19.99

OREGON Power Sharp Starter Kit 541656 fits 16" Echo Poulan +

OREGON Power Sharp Starter Kit 541656 fits 16"  Echo Poulan +

THIS 541656 POWERSHARP KIT BAR/CHAIN COMBO IS 16 INCH CUT. Take your chain saw's chain from dull to sharp in as little as 3 seconds with the portable Oregon® PowerSharp® system. This lightweight bar-mount sharpener is small enough for...

  • Price: $34.99

Oregon 160SLGK095 16" Pro-lite Chainsaw Guide bar .325 66DL 050

Oregon 160SLGK095 16" Pro-lite Chainsaw Guide bar .325  66DL 050

THIS Oregon PROLITE BAR IS 16 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 66 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to...

  • Price: $33.99

OREGON 160SLHK095 16" Chainsaw guide bar 3/8 pitch .050 60 DL

OREGON 160SLHK095 16" Chainsaw guide bar 3/8 pitch .050 60 DL

THIS Oregon PROLITE BAR IS 16 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 60 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A 3/8 PITCH SPROCKET. HUSQVARNA MODELS 33 ,44 ,45 ,49 ,50 ,51 ,55 ,57 ,133...

  • Price: $33.49

OREGON 160SPEA041 16" chainsaw guide bar 3/8 pitch .050 56 DL

OREGON 160SPEA041 16" chainsaw guide bar 3/8 pitch .050 56 DL

THIS Oregon pro-lite BAR IS 16 INCH. (1.3MM) 3/8 PITCH LOW PROFILE .050 GAUGE AND USES 56 DRIVE LINK CHAIN.THIS BAR has A heavy Duty SPROCKET NOSE with 3 rivets.CHAINS HAVE 91 STAMPED ON DRIVE LINK THAT FIT THIS BAR. THIS BAR fits SAWS WITH A 3/8...

  • Price: $42.56
  • Sale Price: $24.25

Oregon 168SLGK095 16" Pro-lite Chainsaw Guide bar .325 66DL 058

Oregon 168SLGK095 16" Pro-lite Chainsaw Guide bar .325  66DL 058

THIS Oregon PROLITE BAR IS 16 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 66 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to...

  • Price: $33.99

OREGON 168SLHK095 16" chainsaw guide bar .058 gauge 3/8 60 DL

OREGON 168SLHK095 16" chainsaw guide bar .058 gauge 3/8 60 DL

THIS Oregon PROLITE BAR IS 16 INCH. (1.5MM) 3/8 PITCH .058 GAUGE AND USES 60 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A 3/8 PITCH SPROCKET. NOTE-SOME MODELS USE .325 PITCH instead check...

  • Price: $33.49

OREGON 180SDET041 18" chainsaw guide BAR 3/8 LP .050 62 DL

OREGON 180SDET041 18" chainsaw guide BAR 3/8 LP .050 62 DL

THIS BAR IS 18 INCH. (1.3MM) 3/8 LOW PROFILE PITCH .050 GAUGE AND USES 62 DRIVE LINK CHAIN. FITS ECHO SAWS WITH A 3/8 LOW PROFILE PITCH SPROCKET CS-280 ,CS-290 ,CS-300 ,CS-305 ,CS-345 ,CS-370 ,CS-400 AND MORE

  • Price: $19.99

OREGON Power Sharp Starter Kit 541662 fits 18" Echo Poulan +

OREGON Power Sharp Starter Kit 541662 fits 18"  Echo Poulan +

THIS 541662 POWERSHARP KIT BAR/CHAIN COMBO IS 18 INCH CUT. Take your chain saw's chain from dull to sharp in as little as 3 seconds with the portable Oregon® PowerSharp® system. This lightweight bar-mount sharpener is small enough for...

  • Price: $45.99

OREGON 180RNDD009 18" Power Match chainsaw bar 3/8 .050 68 DL

OREGON 180RNDD009 18" Power Match chainsaw bar 3/8 .050 68 DL

THIS PROFESSIONAL Oregon BAR IS 18 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 68 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $42.99

OREGON 180RNDD176 18" chainsaw Bar 3/8 PITCH .050 66 DL

OREGON 180RNDD176 18" chainsaw Bar 3/8 PITCH .050 66 DL

THIS POWERMATCH BAR IS 18 INCH. 3/8 PITCH (1.3MM) .050 GAUGE AND USES 66 DRIVE LINK CHAIN.THIS BAR IS A SOLID CONSTRUCTED METAL BODY WITH A REPLACEABLE ONE RIVET SPROCKET NOSE. THIS BAR SAWS WITH A 3/8 PITCH SPROCKET. Fits larger Echo, fairmont...

  • Price: $44.99

Oregon 180SLGK095 18" Prolite Chainsaw Guide bar .325 72 DL 050

Oregon 180SLGK095 18" Prolite Chainsaw Guide bar .325  72 DL 050

THIS Oregon PROLITE BAR IS 18 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Makita, Partner, Pioneer, Red Max or Stanley saws click selector...

  • Price: $33.99

OREGON 180SLHK095 18" Chainsaw guide bar 3/8 pitch .050 68 DL

OREGON 180SLHK095 18" Chainsaw guide bar 3/8 pitch .050 68 DL

THIS Oregon PROLITE BAR IS 18 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 68 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A 3/8 PITCH SPROCKET. HUSQVARNA MODELS 33 ,44 ,45 ,49 ,50 ,51 ,55 ,57 ,133...

  • Price: $34.75

Oregon 188SLBK095 18" Chainsaw Guide bar .325 pitch 72 DL 058

Oregon 188SLBK095 18" Chainsaw Guide bar .325 pitch  72 DL 058

THIS Oregon PROLITE BAR IS 18 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to...

  • Price: $34.75

Oregon 188SLGK095 18" Pro-lite Chainsaw Guide bar .325 72DL 058

Oregon 188SLGK095 18" Pro-lite Chainsaw Guide bar .325  72DL 058

THIS Oregon PROLITE BAR IS 18 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector guide to...

  • Price: $34.75

OREGON 188SLHK095 18" chainsaw guide bar .058 gauge 3/8 64 DL

OREGON 188SLHK095 18" chainsaw guide bar .058 gauge 3/8 64 DL

THIS Oregon PROLITE BAR IS 18 INCH. (1.5MM) 3/8 PITCH .058 GAUGE AND USES 64 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A 3/8 PITCH SPROCKET. NOTE-SOME MODELS USE .325 PITCH instead check...

  • Price: $34.75

OREGON 200ATMD176 20" Armor Tip guide Bar 3/8 pitch .050 70 DL

OREGON 200ATMD176 20"  Armor Tip guide Bar 3/8 pitch .050 70 DL

THIS HARD NOSE BAR IS 20 INCH. 3/8 PITCH (1.3MM) .050 GAUGE AND USES 70 DRIVE LINK CHAIN.THIS BAR IS A SOLID CONSTRUCTED METAL BODY WITH A LASER WELD NOSE. THIS BAR FITS THE FOLLOWING ECHO SAWS WITH A 3/8 PITCH SPROCKET. ECHO MODELS CS-600P...

  • Price: $52.99

OREGON 200RNDD009 20" Power Match chainsaw bar 3/8 .050 72 DL

OREGON 200RNDD009 20" Power Match chainsaw bar 3/8 .050 72 DL

THIS PROFESSIONAL Oregon BAR IS 20 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 72 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $46.19

OREGON 200RNDD176 20" Pro chainsaw Bar 3/8 PITCH .050 70 DL

OREGON 200RNDD176 20" Pro chainsaw Bar 3/8 PITCH .050 70 DL

THIS POWERMATCH BAR IS 20 INCH. 3/8 PITCH (1.3MM) .050 GAUGE AND USES 70 DRIVE LINK CHAIN.THIS BAR IS A SOLID CONSTRUCTED METAL BODY WITH A REPLACEABLE ONE RIVET SPROCKET NOSE. THIS BAR SAWS WITH A 3/8 PITCH SPROCKET. Fits larger Echo, fairmont...

  • Price: $46.19

OREGON 200SLGK095 20" Chainsaw guide Bar .325 .050 gauge 78 DL

OREGON 200SLGK095 20" Chainsaw guide Bar .325 .050 gauge 78 DL

THIS PROLITE BAR IS 20 INCH. (1.3MM) .325 PITCH .050 GAUGE AND USES 78 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A .325 PITCH SPROCKET. NOTE-SOME MODELS USE 3/8 PITCH-LOOK IN OUR 3/8 PITCH...

  • Price: $34.99

Oregon 208SLGK095 20" Prolite Chainsaw Guide bar .325 78 DL 058

Oregon 208SLGK095 20" Prolite Chainsaw Guide bar .325  78 DL 058

THIS Oregon PROLITE BAR IS 20 INCH. (1.5MM) .325 PITCH .058 GAUGE AND USES 78 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. This bar fis some Dolmar, Fairmont, Husqvarna,Infinity, Jonsered, Partner, Pioneer, Red Max or Stanley saws click selector...

  • Price: $34.75

OREGON 208SLHK095 20" chainsaw guide bar .058 gauge 3/8 72 DL

OREGON 208SLHK095 20" chainsaw guide bar .058 gauge 3/8 72 DL

THIS Oregon PROLITE BAR IS 18 INCH. (1.5MM) 3/8 PITCH .058 GAUGE AND USES 68 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. THIS BAR FITS THE FOLLOWING HUSQVARNA SAWS WITH A 3/8 PITCH SPROCKET....

  • Price: $34.95

240RNDD009 Oregon 24" Power Match chainsaw bar 3/8 .050 84 DL

240RNDD009 Oregon 24" Power Match chainsaw bar 3/8 .050 84 DL

THIS PROFESSIONAL Oregon BAR IS 24 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 84 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $59.99

OREGON 240RNDD176 24" chainsaw guide Bar 3/8 .050 gauge 81 DL

OREGON 240RNDD176 24" chainsaw guide Bar 3/8  .050 gauge 81 DL

THIS PROFESSIONAL BAR IS 24 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 81 DRIVE LINK CHAIN. FITS ECHO SAWS WITH A 3/8 PITCH SPROCKET- CS-600P ,CS650EVL ,CS660EVL CS-670 ,CS-680 ,CS-701 ,CS-702 ,CS-750 EVL ,CS-6700 ,CS8000 AND MORE

  • Price: $59.99

OREGON 280RNDD009 28" Power Match chainsaw bar 3/8 .050 93 DL

OREGON 280RNDD009 28" Power Match chainsaw bar 3/8 .050 93 DL

THIS PROFESSIONAL Oregon BAR IS 24 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 93 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $66.99

OREGON 280RNDD176 28" chainsaw guide Bar 3/8 .050 gauge 92 DL

OREGON 280RNDD176 28" chainsaw guide Bar 3/8  .050 gauge 92 DL

THIS POWERMATCH BAR IS 28 INCH. 3/8 PITCH (1.3MM) .050 GAUGE AND USES 92 DRIVE LINK CHAIN.THIS BAR IS A SOLID CONSTRUCTED METAL BODY WITH A REPLACEABLE ONE RIVET SPROCKET NOSE. THIS BAR FITS THE FOLLOWING ECHO SAWS WITH A 3/8 PITCH SPROCKET. same...

  • Price: $66.99

OREGON 300RNDD009 30" Power Match chainsaw bar 3/8 .050 98 DL

OREGON 300RNDD009 30" Power Match chainsaw bar 3/8 .050 98 DL

THIS PROFESSIONAL Oregon BAR IS 30 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 98 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $71.99

OREGON 320RNDD009 32" Power Match chainsaw bar 3/8 .050 105 DL

OREGON 320RNDD009 32" Power Match chainsaw bar 3/8 .050 105 DL

THIS PROFESSIONAL Oregon BAR IS 32 INCH. (1.3MM) 3/8 PITCH .050 GAUGE AND USES 105 DRIVE LINK CHAIN.THIS BAR IS A POWERMATCH SOLID CONSTRUCTED Metal BODY WITH ONE RIVET REPLACEABLE SPROCKET NOSE. THIS BAR FITS SAWS WITH A 3/8 PITCH SPROCKET. This...

  • Price: $74.99

 Oregon replacement guide bar for red max chainsaw