15" VersaCut 158VXLHD009 Oregon guide bar 3/8 pitch .058 56 DL

THIS 158VXLHD009 VersaCut BAR IS 16 INCH. (1.6MM) 3/8 PITCH  .058 GAUGE AND USES 56 DRIVE LINK CHAIN.

This bar fits the following saws with a 3/8 PITCH SPROCKET.

  • Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
  • Efco: 181 (After Aug 07), MT 7200, MT 8200
  • Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
  • Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
  • Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
  • Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
  • Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
  • Shindawa (SDK): 550, 575, 577, 680, 695, 757
  • Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694
  • NOTE- .325 pitch sprocket must be changed to 3/8 pitch to use this bar and 3/8 pitch chains

 

CHAIN CHOICES FOR THIS BAR.

73LGX056G Full CHISEL 

73LPX056G Full chisel 

73JGX056G Full Skip Full Chisel

73DPX056G -Semi-chisel

73V056G -Low Kick

73RD056G Ripping Chain

15" VersaCut 158VXLHD009 Oregon guide bar 3/8 pitch .058 56 DL
Click To Enlarge
  • Item #: 158VXLHD009
  * Marked fields are required.
Qty*
Price $58.99
Sale Price $48.99
2 or more $45.99 each