27RX200G Oregon Hyper Skip Ripping chain .404 200 DL .063 gauge
27RX200G / 27RX200 Oregon Hyper Skip RipCut Ripping chainsaw chain
.404 pitch .063 gauge 200 Drive link Super skip Rip Saw Chain super-skip cutter sequence
Oregon 27RX is a specialty ripping chain designed to be used exclusively on portable sawmill slabbing machines with electric motors and 4 cycle gas engines, such as the D&L, Lucas, package and Peterson sawmills. It is built with a hyper skip chain sequence 9 inch between left and right cutters, which allows for greater chip clearance on super wide cuts. It is most commonly used to slab logs into lumber, cutting burls and stumps into table tops. This ripping chain gives you a smooth, consistent surface when cutting parallel to the grain of a log, and because it has few cutters, it is quicker to sharpen. This chain is recommended for milling purposes only, therefore not recommended for standard hand held use
.jpg)
- Sharpens at 10 degree angle with a 7/32" file (part# 70502)
- Maintain depth gauge at .030 clearance
If you have a 27, 52, 59 or 68 stamped on your current Oregon drive link and there are 200 drive links counted or bar stamped 404 063 200DL, then this chain will fit your saw.
Product Type Saw Chain Prop 65 Description
|
|
|
|
|
|
- Item #: 27RX200 27RX200G
