OREGON 160GDDD096 16" Chainsaw guide Bar 3/8 PITCH .050 60 DL

THIS PROAM BAR IS 16 INCH. 3/8 PITCH (1.3MM)   .050 GAUGE AND USES 60 DRIVE LINK CHAIN.THIS BAR IS A SPROCKET NOSE.

Fits the following chainsaws with 3/8" Pitch Drive Sprockets:

  • Alpina/Castor A-70, CP-55, CP-56, CP-65, CP-66, CP-70, PRO-55, PRO-56, PRO-65, PRO-66, PRO-70
  • Echo CS-900, CS-1001
  • Homelite 35SL, 330, 350, 360, 400, 410, 450, 460, 540, 550, 650, 700, 800, 825, 850, 900, 922, 923, XL 924, XL925, SUPER XL, SUPER XL-AO, V955, XL-12, XL-15, XL400, XL700 Series, XL800 Series, XL900 Series
  • John Deere CS71, CS81
  • Jonsered 60, 61, 62, 66, 70, 75, 77, 80, 81, 90, 110, 111, 601, 621, 801, 820, 830, 910, 920, 930, 1020, 2350 
  • Olympyk (OLEO-MAC) 250, 250A, 251, 252, 254, 260, 261, 264, 272, 280, 284, 355, 460A SUPER, 461, 480A SUPER, 481, 482 POULAN/POULAN PRO 655, 6900, 7700, 8500
  • Remington LOGGER, PL-4, PL-5, PL-55, SL-4, SL-9, SL-10, SL-11, SL-14, SL-16, WOODSMAN
  • Stanley CS11 
  • * Note Jonsered and Olympyk models will have to have the inside of the bar slot hand filed .020 to .395 for proper fit or use D024 mount in .058 gauge. A 71 drive link chain instead of 70 will work if using a 8 tooth drive sprocket.


CHAIN CHOICES FOR THIS BAR.

72EXL060 New PowerCut Chisel

72EXJ060 New PowerCut full skip full chisel

72LGX060G Full Chisel

72JGX060G Full Skip Full Chisel

72APX060G full skip Semi-chisel

72DPX060G -Semi-chisel

M72DPX060 DuraCut semi-chisel with extra layers of chrome for dirty wood.

72RD060G- Ripping

72V060G -Low-kick

72JPX060G - Skiptooth full chisel

72CL060G- Square ground chisel

72CJ060G Square ground chisel full skip

72CK060G Square ground half skip chisel

 

OREGON 160GDDD096 16" Chainsaw guide Bar 3/8 PITCH .050 60 DL
Click To Enlarge
  • Item #: 160GDDD096
  * Marked fields are required.
Qty*
Price $45.00
Sale Price $35.00
2 or more $31.00 each