OREGON 168SLHD009 16" chainsaw guide bar .058 gauge 60 DL 3/8

THIS 168SLHD009 PROLITE BAR IS Replaced by new lightweight 168VXLHD009 VersaCut bar 16 INCH. (1.5MM) 3/8 PITCH .058 GAUGE AND USES 60 DRIVE LINK CHAIN. THIS BAR IS A SPROCKET NOSE.

This bar fits the following saws with a 3/8 PITCH SPROCKET.

  • Dolmar: PS-6400, PS-6400 H, PS-6400 W, PS-7300, PS-7300 H, PS-7300 W, PS-7310, PS-7300 H, PS-7310 W, PS-7900, PS-7900 H, PS-7900 W, PS-7910, PS-7910 H, PS-7910 W, PS-9000, PS-9010, PS-9010F
  • Efco: 181 (After Aug 07), MT 7200, MT 8200
  • Husqvarna: 1100 CD, 160, 162, 181, 185, 2100 CD, 2101, 266 XP, 268, 272 XP, 281, 285, 288 XP, 298, 3120 XP, 362 (9mm Studs), 365, 371 XP, 372 XP, 380, 385 XP, 390 XP, 394 XP, 395 XP, 480 CD, 562 XP, 570, 575 XP, 576 XP, 61, 65, 66, 70, 77
  • Jonsered: 2065, 2071, 2077, 2083, 2094, 2095, 2165, 2171, 2186, 625, 630, 670, CS 2165, CS 2166, CS 2171, CS 2172, CS 2186, CS 2188, Ripping Mill
  • Makita: DCS6401, DCS6800, DCS7301, DCS7901, DCS9000, DCS9010FL
  • Partner: 1655, 2055, 550, 650, 7000, P-100, P-55, P-65, P-70, P-85, R-11, R-12, R-14, R-16, R-17, R-18, R-19, R-20, R-21, R-22, R-23, R-30, R-35, R-40, R-416, R-420, R-421, R-435, R-440, S-50, S-55, S-65
  • Poulan/PoulanPRO: 425, 445, 475, 505, PRO415
  • Shindawa (SDK): 550, 575, 577, 680, 695, 757
  • Solo: 603, 662, 665, 667, 670, 675, 680, 681, 690, 694

NOTE- .325 pitch sprocket must be changed to 3/8 pitch to use this bar and chains

Chain choices for this bar

73LGX060G Full CHISEL

73LPX060G Full chisel 

73JGX060G Full Skip Full Chisel

73DPX060G -Semi-chisel

73V060G -Low Kick

73RD060G Ripping Chain

 

OREGON 168SLHD009 16" chainsaw guide bar .058 gauge 60 DL 3/8
Click To Enlarge
  • Item #: 168SLHD009 to 168VXLHD009
  * Marked fields are required.
Qty*
Price $49.99
Sale Price $40.99
2 or more $37.99 each