Oregon replacement chain saw sprocket

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

Oregon Power mate Chainsaw sprocket #32940. bearing included. Fits Jonsered 410, 425, 435. 7 teeth .325. New old stock, never used. Box may have shelf wear

This fits Husqvarna 435,435E,440,440E Jonsered CS2240,CS2240S .325 pitch 7 tooth crankshaft diameter 0.472 replaces 505441501 Part# for additional rim is 11892 Part# for bearing is 31153 OREGON rim sprocket system. This sprocket system consists...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

This fits Olympyk 931. Redmax G300T,G300TS,G300AV/AVS 3/8 pitch 6 (91) tooth crank shaft diameter is 0.3937 Part# for bearing is 37325 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the...

This fits Olympyk 938,941,942,945,946,951 .325 pitch 7 tooth crank shaft diameter is 0.4724 Part# for bearing is 31153 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving teeth and...

This fits Partner 351. Poulan 210,221,230,260,2050,2055,2075,2150,2155,2175,2250,2450,2550. Patriot 1900, Woodshark. Sears 351062,351142,351161,351181,352161,352180. Snapper 1634,1838 3/8 pitch 6 (91) tooth crank shaft diameter is 0.3937 Part#...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

This fits Stihl 017,018,019,021,023,025,MS210,MS250 .325 pitch 7 tooth crank shaft diameter is 0.3937 Part# for bearing is 37325 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving...

This fits Echo models CS - 300,301,305,306,330T,340,341,345,346,355T,360T,3000,3350,3400,3450 3/8 pitch 6 (91) tooth crank shaft diameter is 0.3937 Part# for bearing is 37511 One-piece spur sprockets are durable, economical and simple to use....

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

Here is a brand new Oregon Spur sprocket 111188X. .325 pitch 7 teeth. No bearing included. It fits Stihl 029, 034 ,034 Super ,036 ,039, MS 290 ,MS 310 ,MS 360 that use .325 pitch bars and chains.NOTE- will not work with 3/8 pitch bar or chain -use part# 34162X for 3/8 pitch.

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

This fits Echo CS-302,CS-315,CS-330EVL,CS-351 John Deere 28,30,35,35EV,40V 3/8 pitch 6 (91) tooth crank shaft diameter is 0.315 Part# for additional bearing is 22152 One-piece spur sprockets are durable, economical and simple to use. Unlike rim...

This fits Dayton 4Z022,4Z023,4Z109. Poulan/Poulan Pro 180,205,225,235,1800,2000,2100,2300,2400,Micro 25. Sears 35093,35094,35202,35203,35205. Skil 1620,1622,1624,1634. Western Auto 012,014,110,112,214,1800,2000,4010,S25DA. 3/8 pitch 6 (91) tooth...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

This fits Husqvarna 61 (after S/N 0510572),266 (after S/N 0510000),268 (after S/N 0510000),272 (after S/N 0510000). Jonsered 625 (after S/N 0510123),630 (after S/N 0510000),630 Super (after S/N 0510000),630 West Coast (after S/N 0510000), 670...

This fits Stihl 030,031,032,041 (after S/N 5664891), 3/8 pitch 7 tooth crank shaft diameter is 0.4724 Part# for bearing is 31153 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving...

This fits Husqvarna 61 (after S/N 0510572),266 (after S/N 0510000),268 (after S/N 0510000),272 (after S/N 0510000). Jonsered 625 (after S/N 0510123),630 (after S/N 0510000),630 Super (after S/N 0510000),630 West Coast (after S/N 0510000), 670...

This fits McCulloch 515,605,610,650,655,700,805,850,855, Mac 1-10 through 10-10, Pro Mac 55, Pro Mac 60, Sp-70, TIMBER BEAR, Montgomery Ward TMY24084,TMY24086 3/8 pitch 7 tooth crank shaft diameter is 0.5 Part# for bearing is 11893 One-piece spur...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

This fits Dolmar 112,113,114,116,116SI,117,119,120,120SI,120 Super. Makita DCS 6000i,DCS 6800i 3/8 pitch 7 tooth crank shaft diameter is 0.5512 Part# for bearing is 16204 One-piece spur sprockets are durable, economical and simple to use. Unlike...

This fits Stihl 029,034,034 Super,36,039,MS 310 3/8 pitch 7 tooth crank shaft diameter is 0.3937 Part# for bearing is 37325 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving teeth...

OREGON rim sprocket system. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar. Rim-type sprocket...

Chainsaw Sprocket 508038X Oregon Spur fits Tanaka ECS-3500 3/8 pitch 6 tooth crank shaft diameter is 0.394 Part# for bearing is 37325

This fits Husqvarna 455, 455 Rancher,460, 460 Rancher .325 pitch 7 tooth crank shaft diameter is 0.5 Part# for bearing is 11893 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving...

This fits Poulan 3416,3816,4018,4218 3/8 pitch 6 (91) tooth crank shaft diameter is 0.5 One-piece spur sprockets are durable, economical and simple to use. Unlike rim sprocket systems, the chain-driving teeth and the clutch cup are combined into...

OREGON rim sprocket system for carving chain. This sprocket system consists of two components: Clutch cup with splined hub, and a free-floating rim. It is only the rim that makes contact with your saw chain as it is driven around your guide bar....